2.7 Custom Parameter Affect Controls

There are three parameter functions contained in the affect parameter group. When using presets these will be set to a specific parameter within the preset. The Deluge convention is:

Assigning custom control parameters

1. Press [CUSTOM X] where x is one of the custom buttons 1, 2 or 3. Custom 1 & 3 are under the lower rotary control and custom 2 upper control.
2. Access the sound editor by pressing Select. Navigate to a parameter to assign. Example : pan
3. When the desired parameter is in-focus, press & hold Learn/Input + turn upper Gold or lower Gold - the rotary which is assigned to the custom control in step 1.
4. The screen will display ‘LEARNED’ to indicate parameter assignment. Parameter is assigned for the specific function.
5. Unassignment is performed by reassigning the parameter control.

Assigning user parameters to existing controls

1. Press the desired parameter control button to change, for example Level/Pan.
2. Access the sound editor by pressing Select. Navigate to a parameter to assign. Example : OSCILLATOR 1 > LEVEL
3. When the desired parameter is in-focus, press & hold Learn/Input + turn upper Gold or lower Gold - the rotary assigned to selection in step 1
4. The screen will display ‘LEARNED’ to indicate parameter assignment. Parameter is assigned for the specific function.
5. Unassignment is performed by reassigning the parameter control.

Note

MIDI controller controls are also assigned using the same process. MIDI Controls can also be unassigned by navigating to the parameter and by then press and hold Shift + Learn/Input.

Assigning controls to modulation depth

1. Press the desired parameter control button to change, for example Stutter/Custom 1.
2. Access the modulation connection patching by pressing Shift + Modulation Destination. Press Select to drill down to the modulation depth parameter.
3. When the desired parameter is in focus, press & hold Learn/Input + turn upper Gold or lower Gold - the rotary which is assigned to the parameter selected in step 1.
4. The screen will display ‘LEARNED’ to indicate parameter assignment. Parameter is assigned for the specific function.
5. Unassignment is performed by reassigning the parameter control. +

Example: sidechain patched to low-pass filter cutoff frequency with a custom control assigned to adjust the depth / strength of modulation.