Skip to content
Deluge Community
Based on the Deluge Manual – Amadeus Edition (draft). Being updated for community firmware up to C1.3.

11.6 Delay

Delay adopts the standard principle of taking an audio input signal and delaying it at the output. By adding feedback the delay will echo and repeat.

Delay Principles

Delay Parameters

Amount

Sets the amount of feedback from the output back into the delay. Amount range 0 - 50.

Rate

Sets the rate at which to sync the delay. Range is 0-50.

Stereo

Sets the output mode to standard delay (off) or to a ping-pong style (on) where the delays are triggered across the stereo field. Ping-pong is disabled if only a single l/mono output is connected and operates only if headphones or stereo l/mono & r connections are connected.

Analog

Sets the style of the delay to give a classic analog style simulation or the digital style sound. Analog is higher in CPU usage and may lower voices.

Sync

The delay can be synchronised to a time interval with respect to the rate. Option to turn synchronisation off, having a free running delay time is available as OFF. Sync options are OFF, 2 bar, 1 bar, 2nd, 4th, 8th, 16th, 32nd, 64th, 128th.

C1.3 Delay sync type when cloning. Unwritten: you can help by adding content.

Setting delay at sound level

  1. Clip view, ensure the clip is in-focus, example: a kit.
  2. Press Shift + DELAY pad, delay shortcuts are as below
    • Amount
    • Rate
    • Sync
    • Stereo
  3. For the selected parameter, turn Turn SelectSelect to adjust the value.

or

  1. In Clip view access the effects within the menu. Press SelectSelect.
  2. Navigate in the menu to the FX section and press SelectSelect.
  3. Navigate in the menu to the ‘DELAY’ section and press SelectSelect.
  4. Select either ‘AMOUNT’, ‘RATE’, ‘PINGPONG’, ‘ANALOG’, ‘TYPE’, ‘SYNC’. Press SelectSelect for the parameter to select.
  5. Adjust the value of the selected parameter by turning SelectSelect.

Setting delay at kit level or sound level

  1. Clip view, ensure the clip is in-focus, example: a kit.
  2. Press Delay Time/Amount affect button. Button illuminates orange.
  3. turn upper Turn GoldGold to change delay-time RATE value or turn lower Turn GoldGold to change delay AMOUNT.
  4. To toggle PING-PONG or STANDARD, Press upper GoldGold. This can be changed in the settings > community features to select SYNC TYPE.
  5. To toggle ANALOG or DIGITAL, Press lower GoldGold. This can be changed in the settings > community features to select SYNC RATE.
  6. Press Affect Entire to affect the entire kit. Button lit orange. Changes will apply to the entire kit