19.5 CV General Settings
The CV and gate outputs and trigger input set up is accessible in the general settings menu. When Deluge is a syncing leader and sending a trigger clock signal to other devices, the gate output 4 can be set to output a trigger clock signal, and / or gate 3 can be set to output a “run” signal (goes high while playback is occurring; low otherwise).
Accessing general CV settings
- Shift +
Select to access the settings menu. - turn
Select to choose and highlight ‘CV’, ‘GATE’ or ‘TRIGGER CLOCK’, in-focus. - Press Select when the desired option is in-focus to access its parameters settings.
- CV - options to set each output channel are provided.
- GATE - options to set each output channel are provided plus a generic off time.
- TRIGGER CLOCK - settings for both input and output of trigger clock.
Show it on the Deluge
| Function | Sub Category | Options | Setting Options |
|---|---|---|---|
| CV | CV OUTPUT 1 CV OUTPUT 2 | Volts per octave | Volts per octave between 0.01 to 2V can be set. Alternatively HZPV sets the CV for each output to Hz per Volt. |
| Transpose | Pitch adjustment in semi-tones with cent adjustments | ||
| GATE | GATE OUTPUT 1 GATE OUTPUT 2 | Type | Sets gate output type between S-Trig or V-Trig. Gate 1-2 will automatically match to CV 1-2 when selected. |
| GATE OUTPUT 3 GATE OUTPUT 4 | Type | Sets gate output type between S-Trig or V-Trig | |
| “Run” Signal | Run, will not output notes. | ||
| Clock | Clock, will not output notes. | ||
| MINIMUM OFF-TIME | Minimum switching time. Time off between gate notes range 0.1-10mS | ||
| TRIGGER CLOCK | INPUT | PPQN - sync pulses. Pulses per quarter note. | |
| AUTO START on/off. On the presence of a trigger clock | |||
| OUTPUT | PPQN - sync pulses. Pulses per quarter note |